- LED Downlighting Trims & Bulbs
- >
- LED Trims / Surface Mounts
- >
- SLIM RECESSED LED LIGHTS | 12W 15W or 33W | 4 6 or 8 Inch | White Black or Brushed Nickel | 120V | LY41RCD LY61RCD LY82RCD
SLIM RECESSED LED LIGHTS | 12W 15W or 33W | 4 6 or 8 Inch | White Black or Brushed Nickel | 120V | LY41RCD LY61RCD LY82RCD
1″ Thick LED Fixture with 30% higher brightness than our 1/2″ model.
THE ULTIMATE HOME RENOVATION LIGHTING FIXTURE. INSTALLS FAST & EASY
For New Construction – Insulated & Dropped Ceilings.
Features
- Dimmable
- cULus Listed, cETLus Approved and Energy Star Certified
- Type IC Rated – Approved for Direct Contact with Insulation
- Air-Tight, Damp Location, Insulated and Non Insulated Ceilings
- Pot Light Housing is NOT Required even for Insulated Ceilings
- Warranty: 10 Year on Residential, 5 Year on Commercial Installations
- model: LY41RCD/30K, LY41RCD/41K, LY61RCD/30K, LY61RCD/41K, LY61RCD/30K, LY61RCD/41K, LY82RCD/30K, LY82RCD/41K
Techinical Specifications
CONSTRUCTION:
Round 4″, 6", or 8" fixtures with integral LEDs. Isolated external driver factory installed inside junction box. One driver for every fixture required.
MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Space in ceiling needed for the driver to fit through the ceiling hole – 2″.
- Default Driver Input Voltage: 120V AC (Dimmable)
- Optional Driver Input Voltage: 277V-347V AC (Not Dimmable)
- Power factor: > 0.95
- Energy Used: 12W, 15W, 33W
- Halogen equivalent: 65W, 75W, or 200W
- Beam Angle: 120°
- Light colour options: Warm White 3000K and Neutral White 4100K
- Light output: 12W (Warm White 700 lm, Neutral White 800 lm), 15W (Warm White 900 lm, Neutral White 950 lm), 33W (Warm White 2200 lm, Neutral White 2400 lm)
- CRI: > 80
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus, cETLus, certified to CSA STD. C22.2 No. 250.0
- Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight
DIMENSIONS:
ID: 4″ for 12W fixture, 6" for 15W fixture, 7 1/4" for 33W fixture; OD: 5″for 12W, 7" for 15W, 9" for 33W; Thickness: 1″ for 12W and 15W, 2" for 33W
Cut out: 4″ to 4 1/4″ for 12W model, 6" for 15W model, or 7 1/2" to 8" for 33W model
Junction Box Dimensions (with driver inside): 3 5/16″ x 3 5/16″ x 1 1/8″ for 12W and 15W models,
5" x 3 5/16" x 1 1/8" for 33W model
Suitable for Damp locations.