ROUND REGRESSED LED LIGHTING FIXTURES | Black | 4 or 6 Inch | 14.5W 17W
Commercial Grade Quality With Architectural Design. Maximum layout flexibility.
- Fully Dimmable
- cULus Listed, Energy Star and T24 Certified
- Type IC Rated – Approved for Direct Contact with Insulation
- Air-Tight, Damp Location, Insulated and Non Insulated Ceilings
- Open Plenum Approved
- Superb Light Quality with CRI 92
- Warranty: 10 Year on Residential, 5 Year on Commercial Installations
- Junction Box Included – No Additional Hardware Needed
- model: LL4RR-27K, LL4RR-30K, LL4RR-40K or LL6RR-27K, LL6RR-30K, LL6RR-40K
- Round 4″ or 6" Regressed LED fixtures with integral LEDs and built-in driver.
- Commercial Grade Quality With Architectural Design.
- Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips.
- 2″ or 2 1/4" Above Ceiling Clearance Required. Quick connectors Included.
Input Voltage: 120V AC
Power factor: > 0.99
Energy Used: 14.5W or 17W
Halogen equivalent: 75W or 90W
Beam Angle: 92°
Light colour options: 2700K, 3000K, 4000K
Light output: LL4RR-27K: 850 lm, LL4RR-30K: 860 lm, LLRSR-40K: 1000 lm, LL6RR-27K: 1000 lm, LL6RR-30K: 1020 lm, LL6RR-40K: 1050 lm
Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
Compliance: cULus Listed
Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight, T24
- 4": OD 5″ (125 mm); ID 4″ (100 mm); Thickness 2″ (51 mm)
Cut out: 4″ to 4 1/4″
- 6": OD 7″ (178 mm); ID 6″ (152 mm); Thickness 2 1/4″ (56 mm)
Cut out: 6″ to 6 1/4″
Suitable for Insulated Ceilings & Open Plenum locations.